Running Cleaner
Once you have configured ZDelete.NET by selecting items you wish to clean and setting desirable options, you can actually start cleaning
process by one of the following methods:
- Click Action | Run Cleaner
- Click Clean button on the toolbar
If you enabled Confirming items before cleaning
option, you'll get a dialog with a list of all items to clean:
If you'd like to exclude some items from the cleaning, you can do it right now by unselecting the appropriate check box. Your current
profile settings will remain intact. The list of items in this dialog will affect only the current session.
To initiate cleaning process, click Start button. If you changed your mind, click Cancel to not start
cleaning.
Interrupting cleaning process
Since the cleaning process is started, you will see a progress in the status bar of ZDelete.NET. Please notice, that Clean
button on toolbar is now disabled and Stop button is enabled until the end of cleaning. Cleaning some items may take a long
time, so you have an option to interrupt the cleaning process by clicking on Stop button.
Once cleaning process is over, you will be redirected to Cleaning Report pane with the list of all items has been
cleaned.
Running Cleaner automatically
There are two options to clean your profile automatically:
- Configure Scheduler for Auto CleanUp daily, weekly or when computer is idle for specified period of time (see
Scheduler Basics).
- You may want to clean your profile each time you log off or shut down the system. To use this option, do the following:
- Click File | Settings...
- Enable Run Cleaner at User Logoff checkbox in General tab
- Click OK
See Also
User Interface |
ZDelete.NET options |
Cleaning Report |
Scheduler
Previous < Main Help >
Next |
